Friday, June 22, 2018   Email: info@slcambodia.com
 
 
 
 
 
 
PRODUCTION PLANNING

Upon obtaining the approval from our customers for the test batch, we will proceed to plan and schedule our garment processing workflow, taking into consideration the type of processes and delivery deadlines.

 

Dry Processes

 

 

 

Under the dry garment processing, we will apply the different effects on the garments required by our customers. The techniques used under the dry processes are as follows:-

 

Quality Assurance

 

Quality control checks are conducted by line supervisors and checkers throughout the entire dry process to ensure consistency and early detection of defects, so that corrective actions can be carried out promptly.

 

Pre-Wash

 

After the dry process, the garments are subjected to a 100% quality check before transferring them to the Pre-Wash Department. Sewing, tacking and hemming of the garments are performed during the preparation stage to prevent any damage to the garments.

 

Shade Segregation

 

After the Pre-Washing preparation, the garments are brought to the Shade Segregation section. This is necessary because garments with different shades may require different formulation during washing to achieve identical washing shade and effects.  In doing so, we can achieve consistent shade and quality after the wet process.

 

Weighing

 

Before washing, the garments are weighed and grouped into different washing batches depending on the capacity of the washing machine. The amount of chemicals used for washing also depends on the weight of the garments.

 

Wet Processes

 


Wet Process

 

Under the wet process, the finishing is chemically applied on the garments to create the effect required by the customers. The broad categories of the wet process are enzyme washing, dyeing and bleaching. Any one or more of these wet processes may be applied to the garments depending on the customerís specifications.

 

In-line QCís are assigned throughout the entire wet process to ensure consistency and early detection of defects during production. Once the QC determines that the desired effect is not achieved, production will be stopped immediately. The technical engineers, together with the production supervisor on duty, will jointly analyze and resolve the problem.

 

Drying

 

After washing, the garments are loaded into the drying machines and properly dried.  During the drying process, the temperature and time vary depending on the type of fabric and the desired result.

 

Final Quality Control Assurance

 

After the garments are dried, the Final Quality Assurance Department comprising shade checkers and quality checkers will carry out checks on the garments to ensure that the processed garments are consistent with good shades, tone, hand feel, abrasions etc. and that the processed garments are not damaged or torn.

 

Delivery

 

 

After the final QC, the packing section prepares the garments for delivery by making an inventory and putting them in clear plastic bags.  Thereafter, the packed garments are loaded in our delivery trucks, and delivered to our customers.

 

 

PRODUCTION FACILITIES AND UTILIZATION

 

Details of our production facilities are as follows:-

 

Location

Company

Service Rendered /
Products

Production Floor /
Area (sq m)

Russey Village, Stoeung, Meanchey District, Phnom Penh, Kingdom of Cambodia

SL Cambodia

Garment processing services

[58,840.5]

 

 

 

 

No. 5 Fuyuan Road, Fuyong Industrial District, Shawan Court, Pan Yu District, Guangzhou, PRC

Queen League

Industrial laundry equipment

[3,120]

 

 
  2 ISO Certificate 2011
  2 Laundry Equipment
     Home       About Us      Production       Factory     Company Profile      Processing     Contact Us  
     Copyright © 1998-2010.
     SL Garment Processing (Cambodia) Ltd. ģAll rights reserved.